Friday, February 13, 2009

Artificially Sweet

Did you ever wonder what was actually in those artificial sweetener packets you might add to your coffee? The popular names on the market are Equal, Sweet N' Low and Splenda, although there are now many commercially available varieties.

Essentially, most of them contain some modified form of sugar that is not metabolized in the same way as standard table sugar (sucrose), thereby adding no caloric value to your diet.

Below are the chemical structures of the compounds present in the three artificial sweeteners mentioned above. Equal contains a mixture of aspartame, maltodextrin and dextrose.
Sweet N' Low is composed of saccharin, potassium bitartrate and dextrose.

Finally, Splenda simply contains a chlorinated derivative of sucrose called sucralose, in which three "OH" groups (hydroxyl groups) have been replaced by chlorine.


Tuesday, February 3, 2009

Oil 101

(Image courtesy of Creative Commons)

Ever wonder where oil comes from? Or how it got there? Or how we get it
out of there?

Oil is a "fossil fuel," which basically means it formed from fossils, i.e., the remains of plants/animals that died a
very long time ago, most of which ended up at the ocean floor. "But how," you might wonder, "did the animal/plant carcasses get turned into oil just by being dead?"

Over time, layers of sediment formed on top of the animal carcasses and eventually a very hard surface (rock) developed on top of them. Trapped between layers of hard sediment, without any oxygen (an environment in which some microorganisms thrive), the plant and animal material was eaten, metabolized and "broken down" into basic, carbon-rich material, which mixed with the surrounding sediments to form shale. But more plants and animals died, and more rock settled on top of the already present rock, causing significant pressure and heat to build up within the layers of hardness. This caused the oil to boil out in the forms of what we call "crude oil" and "natural gas," which accumulated in other, more suitable locations, such as porous rocks, where it was trapped (by less porous rocks surrounding the more porous rocks).

Although forming the oil and getting it trapped within these rocks was clearly the hard part (oh just hundreds of millions of years or so of Earth doing its thing), getting the oil out is not so easy either. First, we need to know exactly where the oil is. Of course, there are many places all over the Earth where large amounts of oil are trapped. In order to find them, geologists typically send shock waves into the Earth through layers of rock and the reflected waves are analyzed to
determine the presence or absence of oil. The reflected waves travel at different speeds, which are characteristic of the particular material through which they traveled.

Once the oil is located, oil drillers (e.g., Chevron) begin developing their plans--after having gained legal right to the land, of course--for drilling. Enter oil rig. Essentially, drill a big hole in the Earth, pump out the oil. A little bit of chemistry interwoven with this messy process, which I'll discuss in due time.

Tuesday, January 13, 2009

Jay Keasling in Newsweek

UC Berkeley Professor Jay Keasling was recently featured in Newsweek for his pioneering work on the development of a new route for the production of artemisinin, an effective antimalarial drug. Artemisinin had previously been extracted from wormwood plants, but the extraction process was time-intensive and not very efficient.

Keasling spliced wormwood genes into yeast DNA in such a way that the resulting cell would convert sugar into artemisinin. This new production method is much cheaper and more efficient than the previous method.

Even more importantly, the method will allow large scale production of artemisinin, which will be made available (and at a much lower cost) to the people who need it but could previously not afford it.

Monday, December 22, 2008

Cold Nuclear Fusion - Fact or Fiction?

Surely you have heard of the supposed "cold fusion," first reported in 1989 at a press conference (super sketch!) by Drs. Stanley Pons and Martin Fleischmann at the University of Utah. But did you ever wonder what it was? Or whether it actually works?

Nuclear fusion refers to the process by which multiple nuclei of similarly charged atoms unite to form a heavier atom and typically A LOT OF ENERGY--with the exception of atoms heavier than iron, which actually absorb energy on fusion. Due to the typically high energy output, nuclear fusion could potentially provide a useful source of energy for our growing--and increasingly demanding--global population. One significant problem is that the process typically occurs only at ridiculously high temperatures, such as those found in the Sun or in a hydrogen bomb. Not surprisingly, scientists have long been interested in designing cheap, safe and effective methods for controlled fusion to produce usable energy.

Pons and Fleischman described a system containing deuterated water (D2O), two palladium electrodes, and a current running through the electrodes. They claimed that the current caused the palladium electrodes to absorb deuterium atoms, which were then forced so closely together that they underwent nuclear fusion to produce neutrons and energy in the form of heat: "...fusion occurs, out of that comes one or two new elements of less mass, and the difference is the energy that comes out. And that then would boil water, essentially. And when you boil water, you can make steam. And when you make steam, you can drive a turbine. And if you can drive a turbine, you can create electricity..." (watch the press conference).

The two scientists concluded that cold fusion had occurred based on the results of a calorimetric experiment that showed a 4:1 ratio of heat put into the experiment versus heat released. They also analyzed the gas released by the reaction by mass spectrometry and observed the presence of tritium. Finally, they claimed to have captured the ejected neutrons from the reaction vessel with water, and the water was found to emit gamma rays of a characteristic wavelength.

Skeptical scientists immediately tried to reproduce a similar cold fusion and they found largely inconsistent results. Many suggested that the heat Pons and Fleischman observed was produced either by the current or by reactions in the water.


Even to this day, many scientists continue to pursue cold fusion as a viable energy alternative. Until someone disproves the process, it will remain elusive--maybe fact, maybe fiction. But the lesson remains: reputable, peer-reviewed scientific journals are a much more reliable medium than a press conference through which to share scientific results.

Wednesday, December 3, 2008

Chemist of the Day: John D. Roberts

Born June 9, 1918 (Yes, he's 90 and still going strong) John D. Roberts got his BA in 1941 and his PhD in 1944 from UCLA. After working as a professor at MIT, Roberts moved to Cal Tech, where he has remained ever since. He has made important contributions to physical organic chemistry--specifically in the areas of nuclear magnetic resonance spectroscopy, resonance in organic chemistry, structural determination, and kinetics.

He has written books on various topics in a manner that is quite easy to read, even if you don't know much about chemistry or anything for that matter. This is one of the many reasons why he has been selected as the chemist of the day--not only has he made significant advances in diverse areas of chemistry, he has very effectively developed and documented these ideas for new generations of chemists and he continues to serve as an inspiration to us all.

Below is a list of some of his important books, all of which I highly recommend to anyone interested in organic chemistry.

Roberts, J.D. : Nuclear Magnetic Resonance. Mc-Graw-Hill, New York, 1959.

Roberts, J.D. :
Notes on Molecular Orbital Calculations. W. A. Benjamin, New York, 1961. [one of my particular favorites!]

Roberts, J.D. : An Introduction to the Analysis of Spin-Spin Splittings in High Resolution Nuclear Magnetic Resonance Spectra. W. A. Benjamin, New York, 1961.

Roberts, J.D., Caserio, M. : Basic Principles of Organic Chemistry. W. A. Benjamin, New York, 1977.

Roberts, J.D. :
At the Right Place at the Right Time. ACS-Books, Amer. Chem. Soc., 1990.

Roberts, J.D. : ABC's of FT-NMR. University Science Books, 2000.


Tuesday, November 25, 2008

Molecule of the Week: BPO



The major ingredient in many acne treatments is benzoyl peroxide (BPO). Did you ever wonder how it works?

BPO is a member of a larger class of compounds called peroxides, which are characterized by an oxygen-oxygen single bond (you may be familiar with hydrogen peroxide, which is the simplest member of this family). A common property among peroxides is a relatively low bond dissociation energy associated with the oxygen-oxygen single bond (51 kcal/mol for hydrogen peroxide). This weak bond easily dissociates to form two radical species, which can undergo subsequent reactions with other chemicals present in the surrounding environment.

The efficacy of BPO stems mainly through its ability to induce breakdown of the outer layer(s) of skin (termed "desquamation" in the medical community). It acts by breaking up the structural proteins (keratins) in the affected area. Once absorbed by the skin, BPO is converted to benzoic acid, presumably via hydrogen abstraction from the keratins.


Friday, November 21, 2008

Photochemistry and Skin Cancer

Did you ever wonder why light from the sun (ultraviolet light) damages your skin and can cause skin cancer?

Ultraviolet (UV) radiation has wavelengths in the range of 200 nm to 300 nm. If you recall the relationship between energy and frequency, E=hv, where v=c/wavelength and c=the speed of light, then we can see that the energy of UV light can range from about 95 kcal/mol to 143 kcal/mol.

Energies in this range are sufficient to induce electronic absorption in molecules. Common organic molecules contain bonds that can be broken with the amount of energy contained in UV light.

One reaction in particular that is driven by UV light is the [2+2] cycloaddition of two thymine molecules in DNA. As you may already know, DNA is composed of two strands of connected nucleotides. Each nucleotide is made up of a nitrogen-containing heterocycle (cytosine, guanine, thymine or adenine), a sugar, and a phosphate group, which links each nucleotide to the next one in a long chain of nucleotides.
Since thymine has a double bond, it can undergo a reaction known as "cycloaddition," in which two double bonds connect with each other to form a four-membered ring (cyclobutane). As you can see below, this is a significant change! Anything that significantly alters the structure of your DNA can have drastic consequences on a number of different processes in your body.The [2+2] cycloaddition of thymine is only one of many reactions that can occur in the presence of high energy UV radiation. So wear your sunscreen!